GB - 17
MOVING THE UNIT WITH THE
ENGINE OFF
IMPORTANT: Never tow unit.
1. Shut OFF engine.
2. Place seat in the service position (See
3. Turn the bypass valves a quarter-turn
counterclockwise to the neutral position.
4. Disengage parking brake.
5. Push unit to desired location.
6. Engage parking brake.
7. Turn the bypass valves a quarter-turn
clockwise to the drive position.
FOR BEST PERFORMANCE
Cut grass when it is dry.
Keep mower blades sharp.
Keep mower deck properly levelled.
Adjust anti-scalp rollers to prevent scalping.
Do not set height of cut too low. For very tall
grass, mow twice.
Do not travel too fast.
Mow with the engine set at full throttle.
When mulching, only remove 1/3 of grass
length per cutting. Do not cut more than
1 inch (2.54 cm) at any one time.
Discharge clippings into areas already cut.
Vary cutting pattern with each mowing.
Do not allow grass or debris to collect inside
of mower deck. Clean after each use.
WARNING: Do not bypass
transmission when on a slope.
Neutral Position
Figure 5
Drive Position
