GRAUPNER HoTT MC-16 Series, Руководство по программированию

Страница: 160 / 332

160 Program description - Phase trim | Winged models
Phase trim
Flap settings specific to flight phases
This option is available as standard on
both transmitter types.
Use the selection keys of the left or right
four-way button to scroll to the »Phase
trim« menu option in the Multi-function menu:
Phase settings
Phase assignment
Logical switch
Timers (general)
Non-delayed chan
Phase trim
Open this menu option with a tap on the center SET
key of the right four-way button.

0%
ELEV
Depending on the settings made on the “Aileron/cam-
ber flaps” line of the »Model type« menu, page 104,
and in the »Phase settings« menu, page 152, this
menu offers at least one control function for ELEV …
Normal

0%
ELEV normal
… on the standard eight-channel
mc-16
HoTT
transmitter up to three control functions (ELE, AIL
and FLAP) for flight phase specific trim settings. On
the
mc-16
HoTT transmitter with optional twelve
channels, and the standard twelve-channel
mc-20
HoTT transmitter, up to five control functions (ELE,
AIL, AIL2, FLAP and FLAP2) for flight phase specific
trim settings. The setting of the flight phase switches,
to be defined beforehand in the »Phase assign-
ment« menu, determines the line that is chosen. An
asterisk marks the flight phase currently active. At the
same time, the name of the respective flight phase
is also shown at the bottom left of the screen. You
can enter settings only for the currently active flight
phase, e. g.:
Normal

0%
ELEV Launch
0%
AI
Launch
Thermal
Dist.
0% 0%
0% 0%
0% 0%
Column “ELEV”
In the column labeled “ELEV” a phase-specific eleva-
tor trim setting can be stored.
Important notice:
• Settings made in this column have an immediate
effect on elevator trim and, accordingly, the trim
setting display.
• Please note in this context that the “elevator”, “ai-
leron” and “rudder” trims are defined by default
as “flight phase specific” on the
mc-16
HoTT
transmitter. However, this standard setting can
be changed to “global” using the optional »Stick
mode« menu, page 114, which can be unlocked
as an extra-cost option.
• Please note in this context that the “elevator”, “ai-
leron” and “rudder” trims are defined by default
as “flight phase specific” on the
mc-20
HoTT
transmitter. However, this standard setting can
be changed to “global” using the »Stick mode«
menu, page 114.
Column “AI” and “FL” …
… on the standard eight-channel
mc-16
HoTT
transmitter.
Column “AI”, “AI2”, “FL”, “FL2” …
… on the
mc-16
HoTT transmitter with optional
twelve channels, as well as the
mc-20
HoTT trans-
mitter, which has twelve channels as standard:
The values in these columns (max. 4) are identi-
cal to those in the “Fl.pos” (flap position) line on the
“Multi-flap menu” within the »Wing mixers« menu,
see page 181. For this reason, any changes made
always affect the other menu directly – and vice versa.
After selecting the appropriate column with the se-
lection keys of the left or right four-way button and a
brief tap on the center
SET key of the right four-way
button, these values can be entered, independent of
one another, with the selection keys within a range of
±150 %.
A simultaneous tap on the

or

keys of the
right four-way button (CLEAR) will reset a changed
value in the currently active value field back to 0 %.
mc
 
16 20