Grasslin thermio essential smart, Руководство по эксплуатации

Страница: 52 / 164

Setting the heating cycle
Selecting the heating cycle
The number of temperature measurements can be set to 3, 6, 9 or 12 times
an hour (factory setting: 6 times an hour).
In the factory setting, the jumper is inserted in the PID position. In this posi-
tion, you can set the heating cycle. If the jumper is in the 2-point position,
you can set the hysteresis.
Example
If the temperature difference in the room is too large, the heating system is switching ON and OFF too
infrequently; in other words, the number of temperature measurements should be set to a smaller
value. If the heating system switches too frequently, select a higher value for the number of tempera-
ture measurements.
Personal:
52