GRASS VALLEY zodiak, Руководство пользователя

Страница: 401 / 458

Zodiak User Manual 401
Still Store Operations
To preview a different Still Store output, press the
PVW Pri
button on the
Preview subpanel, then press the
PVW Pri
button on the Local Aux panel,
and then choose the Still Store output on the selection bus. The output will
be displayed on switched preview. Still Store outputs need to be mapped
to source selection buttons on the Local Aux panel to use this method.
You can also preview an existing video only still or clip the same as any
other source. After it is loaded to a Still Store output, press that Still Store
output’s source selection button on the B bus of an M/E configured with a
preview monitor.
To preview an existing video/key pair Still Store image or clip so you can
inspect its keying quality, load the item to a paired Still Store output, select
that Still Store output source on an M/E’s keyer bus, and set up a key on
that M/E. The Still Store should be keyed over a known background (like
a matte) so you can clearly determine what part of the keyed image origi-
nates from the Still Store.
Images Not Yet Saved
When you select
Show Input
on the Still Store Create Edit menu, the Still Store
temporarily passes the source input of that Still Store to its output. When a
Still Store output is paired and a video/key input source is selected,
selecting
Include Key will also pass the separate key signal of that source to
the paired Still Store output. The incoming Still Store source material can
then be previewed using the methods described above.
When a still is grabbed or a clip is recorded, the result of the capture is dis-
played on that Still Store output. A clip can be rewound and played to
ensure it was recorded correctly.
When previewing an unsaved image, if you delegate a different Still Store
output, the unsaved image will be discarded.
Input Source Selection
Still Store input sources can be selected using the Local Aux panel.
1. Select a Still Store output on the Still Store menu.
2. Press the Still Store bus delegation button on the Local Aux panel.
3. Press the button for the desired source on the Local Aux panel source
selection bus.
The Still Store supports split keys set up on the Local Aux panel.