GRASS VALLEY XIP-3901, Руководство пользователя

Страница: 209 / 308

209
XIP - 3901
User Manual
Outputs Tab
This tab allows you to shuffle and mix audio output streams down to a maximum of 128
output channels. There is a tab for each audio output: Audio 1 , Audio 2 , Audio 3 , and Audio
4 .
All incoming audio channels and all new generated audio channels are available:
Mode LtRt: Enables the downmix of 5.1 channels into an LtRt (Left total Right total) matrix
surround encoded stereo pair.
LoRo: Enables the downmix of 5.1 channels into a LoRo (Left only Right only) stereo pair,
which is a conventional stereo signal.
Dialmorm Set the dialog normalization level. Possible values are: -31 dBFS to -1 dBFS, and OFF.
Default value is OFF.
Center Mix
Level
Set the gain level for the center downmix channel.
Possible values are: +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, and Mute
The default level is -3.0 dB.
Surround Mix
Level
Set the gain level for the left surround and right surround downmix channels.
Possible values are: +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, and Mute.
The default level is -3.0 dB.
LFE Mix Level Set the gain level for the low-frequency effects (LFE) downmix channel.
Possible values are: +10.0 dB, + 9.0 dB, +7.5 dB, +6.0 dB, +4.5 dB, +3.0 dB, +1.5 dB, 0.0 dB, -
1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, and Mute.
The default level is mute.
Level
Normalization
OFF:
Disable output level normalization.
ON: Enable output level normalization: the output level is normalized based on the
applied mix levels to provide a uniform output over the range of mix levels available.
Clipping will never occur, even with full scale input channels and mix levels.
Default value is ON.
Property Description