GRASS VALLEY XIP-3901, Руководство пользователя

Страница: 187 / 308

187
XIP - 3901
User Manual
Advanced Tab
This tab allows you to configure the outgoing payload type and DSCP priority for SMPTE
2110-20 ( Video ), SMPTE 2110-40 ( Meta 1 ) and SMPTE 2110-30/31 ( Audio 1 to Audio 4 ).
These setting apply to both UDC1 and UDC2 tabs.
RTP Stream Set to enable a media stream sender for primary and secondary. This can also be managed
by external NMOS control. See NMOS Panel , on page 123.
Stream Shows the primary (ETH1) and secondary (ETH2) streaming status:
Green: streaming
Red: not streaming
Grey:
not active
TX Stream
Address
Set the IP address and UDP port number of the outgoing stream. IP address 0.0.0.0 disables a
sender. The default UDP port values are 10000.
Address & UDP port can also be managed by external NMOS control. See
NMOS Panel , on
page 123.
TX Stream
Port
SDP File
Click to show the last SDP file transmitted through NMOS since the last bootup. This window
does not refresh automatically; you need to close and re-open the window to see an update.
If the card has never received an SDP file since its last bootup, the window will be empty.
Apply
Cancel When active, this applies or rejects your current changes made in this tab except for Audio
Type and Audio Profile
Property Description