R1 input section
(1)
(2)
(3)
(4)
(5)
(1)
LTC
Used for LTC (timecode) input.
(2)
AES/EBU
Used for digital audio (AES/EBU) input.
(3)
CMPST
Used for composite input.
(4)
DVI-I
Used for DVI-I input. (Also for DVI and YPbPr.)
(5)
SDI
Used for SDI input (left), and for active through
(right).
TIP
•
YPbPr signal is input via the analog RGB pins on the DVI-I
port. To input YPbPr signal, use an analog RGB conversion
connector cable.
P1/P2 output section
(1)
(2)
(3)
(4)
(5)
(6)
(1)
LTC
Used for LTC (timecode) output.
(2)
AES/EBU
Used for digital audio (AES/EBU) output.
Audio level detail display (P1/P2 channel)
(3)
CMPST
Used for composite output.
(4)
DVI-I
Used for DVI-I output. (Also for DVI, RGB, and
YPbPr.)
(5)
SDI
Used for SDI output.
(6)
MONITOR
Used for monitor output (composite).
TIP
•
YPbPr signal is output via the analog RGB pins on the DVI-I
port. To output YPbPr signal, use an analog RGB conversion
connector cable.
41
May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
Rear panel