¾
R1-VTR mode
(3)
(7)
(5)
(4)
(2)
(1)
(8)
(6)
(1)
[Set the clip name for
next ingest file...]
Displays the dialog box to set the name of
the clip to be recorded next. The set clip
name is displayed in [Clip:].
(2)
[Clip:]
Enter the name of the clip currently recorded.
(3)
[Tag:]
Enter a tag for search to the clip currently
recorded.
(4)
[Batch]
Switches to the R1-VTR batch mode.
Recording sources at once (batch
capturing)
(5)
[Properties]
Displays the properties of the clip currently
recorded.
(6)
[Setting of
ingesting]
Sets the saving destination and naming rule
of clips being recorded.
Setting of ingesting dialog box
(7)
[Format]
Displays the video size, frame rate, input
settings, port used for input, source TC (TC
(LTC)/SDI (VITC)/TC (INT)), etc.
(8)
[VTR Record
Settings]
[VTR In:]
Enter the In point timecode of the clip
currently recorded.
[VTR Out:]
Enter the Out point timecode of the clip
currently recorded.
[Length:]
Indicates the time length (duration) of the
clip currently recorded.
[Fixed Length On]
By clicking to set it on, automatically ends
recording after the duration from the start
point specified in [Length:].
146
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
May 16, 2016
Section 9 ― Operations in Workstation Mode