121
May 16, 2016
T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express User Manual
Editing a playlist
Adding place holder to playlist
Place holder is the temporary event that can be replaced to a clip event later.
The length of the event can be set as desired in event properties.
TIP
• Adding and replacing a place holder event is available only in
the workstation mode.
1
Right-click on a desired event and click [Placeholder] -> [Insert
into] -> [Before] or [After].
A place holder is added before or after the event, and a down arrow icon is
displayed on the place holder.
TIP
•
Alternatively, right-click on the playlist without selecting any
event, and then click [Placeholder] -> [Insert at the tail], to add
a place holder.
•
Select [Placeholder] -> [Insert at the tail] from [Playlist Menu]
to create a new playlist containing a place holder event.
P1/P2 channel (playlist view) – 2ch/3ch view
•
You can make settings for adding a place holder event.
[Playlist Placeholder] dialog box (workstation mode only)
The properties of the place holder are displayed.
