GRASS VALLEY T2 Elite Скачать руководство пользователя страница 10

Страница: 10 / 143

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

May 16, 2016

Safety Summaries

EMC Directive
Class A Warning

This product must not be used in residential areas.

FCC Emission Limits

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesirable

operation.

Safety Certification

This product has been evaluated and meets the following Safety Certification Standards:

Standard

Designed/tested for compliance with:

IEC 60950-1

Information technology equipment - Safety - (2nd:2005)

EN 60950-1

Information technology equipment - Safety - (2006)

J60950 (H22)

Electrical Appliance and Material Safety Law

Содержание T2 Elite
















































































































































Результаты поиска

Содержание T2 Elite

Отзывы:

GRASS VALLEY T2 Elite, Руководство по обслуживанию, Страница: 10 / 143

Результаты поиска

Содержание T2 Elite

Отзывы: