GRASS VALLEY Prelude, Инструкция по эксплуатации, Страница: 12 / 102

12 Prelude — Instruction Manual
Section 1 — Prelude System Overview
Prelude software applications are installed onto a customer supplied PC to
permit software updates and system configuration. After system configu-
ration is complete, the PC can be used for monitoring the health of the
panels and matrix, but is no longer required and so may be removed for use
elsewhere.
Prelude systems employ a distributed control system. Router configura-
tions are stored in the Prelude control panels. These router configuration
files list the IP addresses of the matrices in that Prelude system, as well as
Level information and Source and Destination names. A copy of this router
configuration is sent from the panel to the matrices with the IP addresses
listed in that configuration. In fact, a Prelude control panel automatically
sends its router configuration to the matrices whenever that panel reboots.
Identical router configurations must be present on all control panels for
proper Prelude system operation.
Prelude 3.2.1 System Capabilities
• Off-line matrix and remote panel configuration using NetConfig with
Prelude plug-in.
• Support individual matrix sizes up to 128 x 128.
• Define up to 256 Sources and 256 Destinations.
• Control up to eight Concerto matrix frames or up to eight Acappella
matrix frames, for a total of eight levels per Prelude system.
• Supports all Concerto matrix boards.
• Supports Concerto Output Monitoring.
• Support all Acappella matrix frames (video, audio, or combination).
• Support up to 32 control panels of any of the following types:
Encore 48B, 32 BPS, PMB, XY, and UCP panels, Acappella Remote
Panels, and Kalypso KMD and KSD Remote Aux panels.