GRASS VALLEY PERFORMER, Инструкция по эксплуатации

Страница: 38 / 182

2-6
Section 2 —
Installation
Cabling
Performer cabling is straightforward. Refer to the illustration.
AC IN
The Performer power
supply automatically
accepts 120V or 240VAC
input power. No special
settings are necessary.
The frame is shipped with
either TUV or UL AC line
cords as requested in the
original system order.
AUDIO NOTE:
The frame is shipped with
either AES/EBU “D” or
BNC audio connectors.
The BNC frame and the
pinout of the D audio
connectors are shown
above.
A1, A2
A1 and A2 audio connectors may be used as left and right channels
for stereo applications, or as two independent audio channels.
AUDIO 1 & 2 (BNC) IN
1. Using 50-ohm coaxial cable,
connect the left or right channel
of your number 1 audio source
to AUDIO 1 IN BNC #1.
2. Connect the remaining
number1 audio source chan-
nels to AUDIO 1 IN BNCs #2 -
10.
3. Connect your second audio
source left or right channel to
AUDIO 2 IN BNC #1.
4. Connect the remaining number
2 audio source channels to AU-
DIO 2 IN BNCs #2 - 10.
AUDIO 1 & 2 (BNC) OUT
Two points of connection are
provided for the single output of
each audio channel. Typically,
one is used as a monitor output;
the other as the primary destina-
tion.
AUDIO 1 & 2 AES/EBU I/O
37-pin D connectors provide left
and right channel inputs and
outputs. Each D connector sup-
ports 10 audio inputs and 1 au-
dio output. See above for pinout
information.
Input 1,
(+) (–) (s)
Input 3,
(+) (–) (s)
Input 5,
(+) (–) (s)
Input 7,
(+) (–) (s)
Input 9,
(+) (–) (s)
(s) (+) (–)
Input 2
(s) (+) (–)
Input 4
(s) (+) (–)
Input 6
(s) (+) (–)
Input 8
(s) (+) (–)
Input 10
Output
(+) (–) (s)
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
AC IN
A2 OUT A1 OUT V AUDIO 2 IN AUDIO 1 IN
7
9 1 1
3 5
8 10 2 2 4 6
7
9
1 1 3 5
8 10 2 2 4 6
37-Pin, D
Audio Connectors