manualshive.com logo in svg

GRASS VALLEY NV9605, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9605 Скачать руководство пользователя страница 63

55

NV9605

User’s Guide

Environmental Specifications

NV9605 Environmental Specifications 

Defaults 

Initial Panel State 

Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.

Configuration Page 

The initial NV9605 configuration has no buttons defined. The default panel options are:

Behavioral model: 

Limited X-Y.

Release mode:

Normal.

Default destination: 

None.

Status monitor: 

None.

Data routing mode:

Automatic.

Default name set:

System names.

All other options:

Disabled (check boxes clear).

DHCP 

The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a 
fixed IP address using the Panel IP Configuration Utility. 

Specification

Detail

Operating temperature

0–30

 

° C, ambient.

Relative humidity

0 to 90%, non-condensing.

Cooling

No fan required.

Содержание NV9605












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды