manualshive.com logo in svg

GRASS VALLEY LDK 4488 SuperXpander, Руководство пользователя, Страница: 7 / 44

Поделиться
Скачать
GRASS VALLEY LDK 4488 SuperXpander Скачать руководство пользователя страница 7

LDK 4488, LDK 4489 SuperXpander/Xpander User’s Guide (v6.0)

7

•

There are no user serviceable parts inside. Refer servicing to qualified personnel only or 
contact your local Grass Valley representative;

•

Observe local building safety, fire protection and electrical installation standards during 
installation and operation of this equipment;

•

Before connecting the equipment to the power supply of the installation, verify the proper 
functioning of the protective earth lead;

•

Whenever it is likely that safe operation is impaired, the apparatus must be made 
inoperative and secured against any unintended operation.

Cautions

Cautions indicate procedures or practices that should be followed to prevent damage or 
destruction to equipment or property.

•

Do not subject the unit to severe shocks or vibration;

•

Do not expose the unit to extremes of temperature;

•

To prevent risk of overheating, ventilate the product correctly;

•

Connect the product only to a power source with the specified voltage rating.

Содержание LDK 4488 SuperXpander













































Отзывы:

Нет отзывов