manualshive.com logo in svg

GRASS VALLEY LDK 4488 SuperXpander, Руководство пользователя, Страница: 19 / 44

Поделиться
Скачать
GRASS VALLEY LDK 4488 SuperXpander Скачать руководство пользователя страница 19

LDK 4488, LDK 4489 SuperXpander/Xpander User’s Guide (v6.0)

19

Chapter 2 - Installation

2.3  Exchanging the transmission module

The SuperXpander/Xpander is supplied with either a Triax or a Fiber transmission module, 
depending on the base station and camera connector type you are using. You can exchange 
the transmission module easily to use the SuperXpander/Xpander with a different transmission 
system or connector type. To exchange the transmission module proceed as follows:

Caution 

Make sure that power is switched off and both the mains power lead and the Triax or Fiber 
cable are disconnected from the SuperXpander/Xpander.

1.

At the left side of the SuperXpander/Xpander locate the currently installed transmission 
module.

2.

Unplug the flying lead from the camera adapter side.

3.

Unscrew the four captive screws of the transmission module using a Torx-10 screwdriver.

4.

Pull the transmission module out of its bay. Note that the flying lead is attached to the 
module. Store the module at a safe place. The module can also be stored in the optional 
LDK 6986/01 Transport case.

5.

Insert the new transmission module into the empty bay and slide it in until the front of the 
module is aligned with the outside of the SuperXpander/Xpander.

6.

Secure the transmission module using the four captive screws.

7.

Plug the flying lead into the camera adapter.

☞

Note

 

Local power mode is not fully supported when using the SuperXpander/Xpander in a Fiber 
configuration. Refer to the chapter 

“Power” on page 35

.

4x captive screws

flying lead

transmission 
module

Содержание LDK 4488 SuperXpander













































Отзывы:

Нет отзывов