manualshive.com logo in svg

GRASS VALLEY KMV-3901, Инструкция по установке и обслуживанию, Страница: 52 / 138

Поделиться
Скачать
GRASS VALLEY KMV-3901 Скачать руководство пользователя страница 52

52

System Configuration

Installing Signal Path Viewer

3 Unless your browser let you run the file (and you chose to do so), navigate to the 

location were you saved the installer file and open it.

More security warnings or prompts may appear, which you may safely dismiss or 
accept.

A window appears, showing the download and installation progress.

At the end of the installation process:

• If you have Windows 7, or Windows 10, shortcuts (

) are added to your desktop 

and to the Start menu (under 

All Programs

).

• If you have Windows 8.1, or Windows 8, Signal Path Viewer will appear on your 

desktop, in the Apps view with all the other installed applications on your PC 
(Windows 8.1), or in your Start screen (Windows 8).

Once the installation has completed, the Signal Path Viewer panel appears. Depending 
on your Windows Firewall settings, a security alert may also appear.

• Click 

Allow access

 to unblock the application.

The application automatically connects to your multiviewer.

Содержание KMV-3901











































































































































Отзывы:

Нет отзывов