GRASS VALLEY KMV-3901, Инструкция по установке и обслуживанию, Страница: 107 / 138

107
KMV-3901/KMV-3911
Installation & Service Manual
The Technical Support page appears.
3 Click system snapshot .
The system snapshot generation may take a few moments, after which your browser
prompts you to save the resulting compressed folder to your hard drive.
4 Browse to the location where you want to save the ZIP file, and then click Save .
Upgrading the Multiviewer
Whenever possible, upgrade the multiviewer to use the latest Kaleido Software version
number to take advantage of the latest bug fixes and stability enhancements. See the
Kaleido Software Release Notes for more information about a Kaleido Software release.
Pre-upgrade Checklist
Click here
... or here
IMPORTANT
Back up your system database
Before upgrading the multiviewer system, make sure you have a backup of
the current system database so that you can return to the previous Kaleido
Software version if necessary. Refer to
Creating a Backup in the Kaleido
Software User’s Manual, for details. See Related Documentation , on page 9 .
Multiviewer requires new restore points saved AFTER controller upgrade
If you have upgraded the CPU-ETH2 firmware from version 2.1.2 (or earlier) to
version 2.2.0 (or higher), you must save restore points to the CPU-ETH2
controller’s non-volatile memory, for all your multiviewer cards. See
Saving a
Restore Point to the Controller’s Non-Volatile Memory , on page 29. Refer to
the Densité CPU-ETH2 Release Notes for more information.
Alarm debouncing may need to be recalibrated
Before upgrading from version 6.50 (or earlier) to version 6.60 (or higher) of
the Kaleido Software, make sure to review your system’s alarm debouncing
calibrations, some of which you may have to modify if you want to maintain
the same behavior.