manualshive.com logo in svg

GRASS VALLEY KARRERA, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY KARRERA Скачать руководство пользователя страница 327

KARRERA  —  User Manual

327

ClipStore (Image Store Clips)

 

ClipStore (Image Store Clips)

With the

 

seamless integration of the K2 Summit/Solo technology into the 

Image Store menus, you can record and play clips with audio. The Summit 
provides four Video/Key channels while the Solo provides two.

Note

See the 

Karrera Installation & Service Manual

 for engineering configuration 

information.

•

The ClipStore is supplied to record and playback with AVC-Intra 100 or 
DVCPRO HD compression format. Clips imported in DVCPRO HD, 
DVCPRO 25/50, DV, and MPEG-2 will play natively.

•

The ClipStore supports embedded audio only. The AES inputs and 
outputs are not used.

The ClipStore is completely configured and controlled from the Karrera 
menu and control panel. There is no need to use the built-in AppCenter 
Elite software. In fact, if changes are made to the ClipStore using App-
Center, they will be overwritten by the switcher the next time it sends a con-
figuration to the ClipStore.

Note

To change the Summit IP address, see the 

Karrera Installation & Service 

Manual

.

This highly integrated solution provides several powerful features, 
including:

•

Fast access to clips and folders,

•

Large storage capacity,

•

Non-volatile memory—no loss of images due to power failure,

•

Clip control from the Karrera Menu Panel and clip stack control from 
the Karrera Control Panel,

•

ClipStore device controls (including macros and cues) are E-MEMable, 
and 

•

Make sub-clips from clips and build composite clips with audio.

Summit/Solo Software Version

Version 7.2.7.1403 is the current version of the AppCenter Elite software for 
the ClipStore server, as of the release of this manual. The latest version of 
the server software is available on the Karrera Software Download site. 

CAUTION

Do not use AppCenter Elite software for ClipStore from the Summit/Solo 
server web site as it may not be compatible.

Содержание KARRERA



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды