GRASS VALLEY KARRERA, Руководство пользователя, Страница: 148 / 370

148 KARRERA — User Manual
Section 4 — Switcher Control
To configure a source table with source substitutions:
Configure source substitutions for source tables in the Table Setup pane
(
Figure 70 ). Use the Linked Source buttons for faster configuration (see
Table Setup, Linked Source Buttons on page 146 ).
The default is one-to-one, i.e. Source 1, Linked Source 1, Source 2, Linked
Source 2, etc. You can substitute the current Linked Source (Linked Source
column) with any source from the scrolling Source List (
Figure 70 , right):
1. Touch a source table in the Source Tables list (right).
2.
Rename the Source Table (recommended).
3. Touch a source in the Linked Source column of the Source/Link Source
scrolling list the Table Setup pane.
4. Touch the substitute source in the scrolling Source List ( Figure 70 ,
right).
The Linked Source changes to reflect your selection.
5. Repeat the first two steps for all source substitutions.
The Source Table will be updated with substitutions and Source Table
Name in the Links Setup menu, Source Table list.
Storing (Copying) Source Table Substitutions to another Source table
Source Table configurations from one source table can be stored (copied) to
another using the
Store
button.
To store source table configurations to another source table:
1.
Touch the source table from the Source Tables scrolling list you wish to
store (copy) from, to another source table.
2.
Touch the
Store
button.
3. Touch the source table you wish to store the configuration to
(destination).
Changing Source Tables for a Bus Link
The Source Table is assigned to the bus link.
To change the source table for the bus link:
Touch the Linked bus data pad in the Link Setup menu, Current Link pane,
for the bus link you wish to change the Source Table. The Source Tables
column becomes available. Touch another source table for the bus link.