GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 78 / 278

78 KARRERA K-FRAME — Installation & Service Manual
Section 4 — System Cabling
Factory Default Network Settings
Note Customer orders with multiple Control Panels will be pre-configured to the
listed IP addresses. However, if one of these additional Control Panels is reset
to factory defaults, it will be given the standard 1A default 192.168.0.173
address.
To integrate K-Frame system devices into an existing network, ask the local
network administrator for that network’s subnet mask. Before changing IP
addresses always set the subnet masks of the devices to the mask of the
local network.
Optional Touch Screen Menu Panel Cabling
Five connections are required for the Touch Screen Menu option. If the
articulated arm is used, some of these cables can be routed through chan-
nels in the arm that have covers that click into place.
Table 2. K-Frame System Default IP Addresses
Device IP Address
K-Frame Video Processor CPU 192.168.0.170
Image Store 192.168.0.171
Control Panel Surface 1A 192.168.0.173
Touch Screen Menu Panel 1 192.168.0.175
Touch Screen Menu Panel 2 192.168.0.176
Control Panel Surface 1B 192.168.0.177
Control Panel Surface 2A 192.168.0.178
Control Panel Surface 2B 192.168.0.179
32-Crosspoint Remote Aux Panels
V1.6.5 and higher software:
(hard reset with the front panel buttons)
IP Address: 192.168.1.2
Frame IP: 192.168.1.1
Gateway IP: 192.168.1.1
Subnet Mask 255.255.255.0
Note 32-Crosspoint Remote Aux Panel default settings must
be changed to operate with other system components
that are configured with their default IP addresses.
All Subnet Masks) 255.255.255.0
All Gateways
(except V1.6.5 software Remote Aux panel) 192.168.0.1
Reserved For Future Use
CAUTION Do not connect any devices configured with the fol-
lowing IP addresses to a K-Frame network.
Video Processor Frame Gigabit Ethernet 192.168.0.172
Reserved LAN Port 192.168.0.174