GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 230 / 278

230 KARRERA K-FRAME — Installation & Service Manual
Section 7 — Maintenance
Control Panel IP Information
After a panel processor board replacement, the Video Processor Frame IP
address will need to be re-entered into the Control Panel.
Menu Panel IP Information
Replacing a Menu Panel processor will require resetting all Menu Panel IP
addresses. This includes the actual Menu Panel IP addresses, as well as the
addresses the Menu Panel uses to communicate with the Video Processor
Frame and Control Panel (DPOPs).
3-ME Control Panel Interior
Figure 170. Karrera 3-ME Panel Open, Air Guide In Place
Note Pressing the Reset button performs a hard reset of the panel processor. The
preferred reset method is to use the EMEM area, which performs a controlled
shut-down of the panel software and then reboots the operating system. The
Reset button should only be used if the panel is in a state that does not allow
an EMEM area reset.
Re s et
B u tto n
Powe r O n /Off
Compact
Fla s h
U S B (2)
Boa r d Powe r
(6 of 8 us ed)
Boa r d Comm un icatio ns
RJ45, b u t n ot Ethe rn et
(14 of 15 us ed)
8804_31
Ai r G u ide Cove r
To rs io n Ba r
Lid S p r i n g (2)