GRASS VALLEY K2 SAN, Инструкция по установке и обслуживанию

Страница: 48 / 346

Table 12: Power specifications
Primary chassis Primary chassis Characteristic
100 to 240 VAC, single-phase
50/60 Hz 100 to 240 VAC, single-phase
50/60 Hz Power conditions
290 W 400 W Maximum power consumption
(when operating in a 25° C
environment)
Related Topics
K2 RAID storage description on page 253
FT Server Rack specifications
Use the following specifications to determine load, spacing, power, and other factors when planning
system racks.
Table 13: Mechanical specifications
Type I and Type II Specification Characteristic
Rack-mount Cabinet Type
4 Rack units
483 (w) x 178 (h) x 736 (d) mm, 19.0 in. (w) x 7.0 in. (h) x 28.9 in. (d) External Dimensions
40 cm or more on top, 1 m or more on the front and rear, 60 cm or more
on the right and left. Rack clearance
Maximum 51.5kg , 113.3 lbs Weight
Table 14: Power specifications
Type II Specifications Type I Specifications Power Supply
AC 100V-240V +/- 10%, 50/60Hz +/-
3Hz AC 100V-240V +/- 10%, 50/60Hz +/-
3Hz Type
1300VA, 1290W 1400VA, 1390W Power
Consumption
Securing a server to a rack
If the server is a Dell server, follow the instructions provided in the shipping box to install the rack
rails and position the server in the rack. For the Dell 1RU PowerEdge Server, follow the illustration
below to secure the system to the rack.
48 K2 SAN Installation and Service Manual 2014 01 27
Cabling K2 SAN devices