manualshive.com logo in svg

GRASS VALLEY JUPITER CONTROL PANEL L32 -, Инструкция по эксплуатации

Поделиться
Скачать
GRASS VALLEY JUPITER CONTROL PANEL L32 - Скачать руководство пользователя страница 121

JUPITER L-S and LCD Series Control Panel Instruction Manual

121

LD16 Control Panel

 

Selecting a Destination to be Controlled (Single Destination Mode)

Page Selection Method

1.

Press 

Dest

. The D1 window will display 

Destination?

 and the other 

windows will display a page of Destinations.

2.

Use the 

Up/Down

 arrow buttons to scroll through the available pages of 

Destinations (For example, 

Pg: 3/ 66

 in the D3 window). Destinations 

appear in groups of 16, in yellow.

3.

Select the desired Destination by pressing its adjacent soft button. 

4.

Press 

Take

. The D15 window will display the name of the Destination 

now being controlled in yellow, and the panel returns to the Single 
Destination mode, ready for Source selection. By default, the soft 
buttons for all levels will illuminate. 

Unless some buttons are toggled off, switching to a new Source will involve 
all levels. (For information about breakaway switching, see 

Breakaway

 on 

page 122

.)

•

If the Destination cannot be changed, it may be because the panel has 
been limited to a certain Destination by the CP Output set used on the 
MPK Devices table. See 

Section 4-Jupiter System Configuration

.

Category Subset Method

1.

Press 

Dest

. The D1 window will display 

Destination?

 and the other 

windows will display a page of Destinations.

2.

Press a Category button (VTR, VCR, etc.). This will restrict the 
Destinations displayed in the windows to that selected category. If 
multiple pages in that category exist, you can scroll through them with 
the 

Up/Down

 arrow buttons.

3.

Select the desired Destination by pressing its adjacent soft button. 

4.

Press 

Take 

to select it as the active Destination and return to Single 

Destination mode. 

Selecting a Source (Single Destination Mode)

Note

If a Destination has been Protected or Locked by another panel, the 

Protect/

Lock

 button will illuminate steady amber (Protect) or red (Lock) and the Des-

tination will not be able to be switched. To continue, the Destination must be 
unprotected or unlocked by the panel that set the protect or lock (the name 
of that other panel will be displayed in the menu). 

Содержание JUPITER CONTROL PANEL L32 -

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды