GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 189 / 338

189
UCP - 3901
User Manual
Label Patterns
By default, IP Senders and Receivers will use the default labels in the NMOS Registry.
However, you can optionally customize the label to be generated according to a pattern.
This pattern allows you to specify a label in a generic manner, which will automatically be
adopted and applied to all NMOS IP Senders and Receivers. This definition is known as a
Label Pattern.
Defining a Label Pattern
Label Patterns are defined for both IP Senders and IP Receivers. The basic process for
defining a label pattern is:
1 Enter at least one Auto-generated variable into the Sender Pattern / Receiver
Pattern
field. The available variables, plus the syntax to be used, are shown in the
Auto-generated
section below the input fields. It does not matter which variable is
used, but at least one must be present.
2 Optionally, enter one or more
Optional variables
into the
Sender Variables
/
Receiver Variables fields. These allow a more descriptive label to be generated if
required. The available variables, plus the syntax to be used, are shown in the
Optional
variables
section below the input fields.
3 When all the required values have been entered, click
Restart
to power-cycle the
UCP - 3901 / IQUCP Card; IP Senders and Receivers will then automatically generate
labels as defined.
The Sender Pattern
/
Receiver Pattern Fields
Leaving the Sender Pattern / Receiver Pattern fields empty will result in the default text
string labels for IP Senders/Receivers being used. If a minimum of one variable is entered,
the IP Sender/Receiver will auto-generate labels in accordance with the label pattern you
have set. There is a maximum limit of 63 characters for all text entry boxes.
Restoring Preset Values
Preset values are restored by clicking .
• For the
Sender Pattern
field:
{dev} Sender:{spig}
Auto / Search domain,
New
Set a new search domain on which the card will search for
NMOS devices and the NMOS registry when the
Registry Mode
is set to Auto .
Static / IP Address Set the NMOS registry’s IP Address when the
Registry Mode
is
set to Static .
Static / Registration Port Set the NMOS registry’s registration port number when the,
Registry Mode is Static . The default Registry Port value is 3210.
Static / Querry Port Set the NMOS registry’s query port number when the
Registry
Mode is Static . The default Query Port value is 3211.
Take Click to apply your new settings.
Parameter Description