GRASS VALLEY IQUCP25, Руководство пользователя

Страница: 148 / 338

148
Essence Processing SDC
Logging - Network - 1G
Logging - Network - 1G
The Logging Network page shows MANAGEMENT network message types: Log field names
and current log values are listed in the Log Field and Log Value columns respectively.
Information on several parameters can be made available to a logging device connected to
the RollCall network. For the UCP-3901, logging must be configured and enabled; see
Logging - Configuration (UCP - 3901 Only) on page 137. This page does not apply to
IQUCP25 / IQUCP50 cards as this port is unused with these models.
Figure 6 - 31:
Logging - Network Page
The logging page comprises three columns:
Enable check boxes to activate log fields as required.
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Parameter Description
LAN_PORT_3_NAME= Logs the Ethernet port name.
LAN_PORT _ 3 _ SPEED= Logs the Ethernet connection speed. Valid values
are:
10 Mbit/s Full Duplex
10 Mbit/s Half Duplex
100 Mbit/s Full Duplex
100 Mbit/s Half Duplex
1 Gbit/s Full Duplex
No Link