GRASS VALLEY GV KORONA Скачать руководство пользователя страница 135

Страница: 135 / 415

Kayenne/Karrera/GV Korona

User Manual

137

Macro Control Menu

The Macro Control Menu and Control Panel are part of the

Control Surface

. There are four

macro player control surface groups displayed in the Control Menu: GPI, E-MEM, CS B and

CS A with five macro players each, for a total of 20 macros displayed. The Macro Control

menu displays the status of the five players in each group. From the Macro Control menu,

you can stop or resume a paused macro from any group. For information about playing

macros, see (

About Playing a Macro from the Control Menu (Important)

For all groups:

•

The latest macro played from the menu will be displayed in the far left player of the

control surface you are logged into and

•

Previously run macros will shift to the right when the latest macro is run so only the last

five macros are displayed.

Macro Control Menu Buttons and Data Pads

Menu Pane

Button/Label

Description

User Logged In As:

User Logged In As: Suite, Suite Name, and Control Surface logged into in

the Eng Login menu

Macro Run Log

Scrolling list of the last 99 macros played

1-99 of the last played macros, last played first

Src

Macro player group: GPI, E-MEM, CS B, CS A

Num

Macro register number

Name

Macro name

Содержание GV KORONA
































































































































































































































































































































































































































Результаты поиска

Содержание GV KORONA

Отзывы:

GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 135 / 415

Результаты поиска

Содержание GV KORONA

Отзывы: