GRASS VALLEY Encore, Руководство по настройке

Страница: 45 / 426

Encore — Configuration Manual 45
Basic Procedures
Loading a Local Application
The four OUI local applications are available at all times. To load an appli-
cation, click its icon in the Task Bar. The icons are shown below with a brief
description of the application.
Note You can load more than one local application. If you exit an application when
more than one is loaded, the screen reverts to the application previously dis-
played. You can toggle between local applications by clicking the icons in the
Task Bar.
Loading a Remote Application
1. Click a blank button on the taskbar. A list of remote applications is
displayed (See
Figure 22 on page 44 ); those that are available are
marked with a double arrow (>>).
2. If the application you require is available, double-click its name in the
list (or click once and then click the
Enter/Return
icon).
Note If the application you require is not available, you must request it from
another user before you can load it (see
Reque s ti n g a n Applicatio n f r om
A n othe r U s e r on page 46 )
Local Machine Control Panel
— Provides local control of devices
available on the Encore Network and information on the
status of selected devices.
Local Router Panel — Provides routing facilities between avail-
able Source and Destination devices.
Filer-Fax
— Provides management facility for all clips on the
Encore system as it accesses the Sharer. It is used to filter and
select clips to load via the LMCP.
OmniPager
— This application provides a messaging service
between all workstations on the Encore network.