GRASS VALLEY Encore, Руководство по настройке

Страница: 325 / 426

Encore — Configuration Manual 325
Configuring Tie-Lines
Configuring Tie-Lines
Tie-Line Manager Application Access
The Tie-Line Manager application needs to be accessible, which is accom-
plished with System Manager and by enabling the application in the web
page of the System Controller running Tie-Line Manager.
Create Tie-Lines in the Router Controllers
While Tie-Line Manager is used to configure tie-lines, the Router Control
Applications are used to create them, because system tie-lines are paired
Sources and Destinations between different matrices.
You will need to decide which matrix connectors will be used for your tie-
lines, and what names you will use to identify each tie-line. A descriptive
name that includes the matrices or Areas each tie-line spans can help you
keep things straight during configuration.
The tie-line Source configuration is set by configuring a Destination on the
Router Controller of the Source Area to be a tie-line. Similarly, the tie-line
Destination configuration is set by configuring a Source on the Router Con-
troller of the Destination Area to be a tie-line, with the same name (see
Figure 197 and Figure 198 ).
Usage
Displays the number of tie-lines and how many are cur-
rently being used between the selected Areas.
Requests
Displays the number of requests for tie-lines in this day
between the selected areas. Each day commences at mid-
night.
Successes
Displays the number of requests successfully accommo-
dated today.
Failures
Clicking on this button displays a list of the last 100 failed
route requests for tie-lines and the day/date of failure
between the selected areas. The last failed route appears at
the top of the list. A tie-line path can fail for various rea-
sons, for example, tie-lines may all be in use.
Clear
Clears the
Requests
,
Successes
, and
Failures
values.
(Menu Bar) Refresh
Refreshes the list, updating it with any recent tie-line status
changes.