GRASS VALLEY Encore, Руководство по настройке

Страница: 319 / 426

Encore — Configuration Manual 319
Tie-Line Manager Screen Descriptions
Src Blocks Screen
Figure 192. Tie-Line Manager Source Blocks Screen
The Source Blocks screen lets you block Sources from being accessed by
Destinations via tie-lines. This is accomplished by specifying a Source, cre-
ating a Block for that Source, and then creating Rules for that Block.
Source Blocks are active on the next route request, and existing Destina-
tions that are already routed to a now blocked Source will not be routed
away.
Note S ource Blocks only apply to Network route requests and NOT to tie-line
routes made directly in the TLM Route S creen. Do not try to use the Route
S creen to test S ource Blocks.
Source Restrictions Window
The left and right arrows at the top are used to scroll through the Sources
that currently have Block restrictions. Clicking on the name of the Source
opens a window allowing you to select a different Source for that Block.
The listed order of the currently selected Source Blocks is shown on the
right. The Window below displays the Rules in established for that Source.
The arrows on the right can scroll a long list of Rules.
Save
Saves the selected tie-line configuration.