GRASS VALLEY Encore, Руководство по настройке

Страница: 262 / 426

262 Encore — Configuration Manual
Section 6 — Control Panel Configuration
48B + 48B + 48B Panel Group Configuration Example
Three 48B panels can be grouped, to provide a total of 144 programmable
buttons. One panel is the Master, the other two are Expansion panels.
Figure 163. Example of a Three 48B Panel Group
1. Log in to the CP Server application.
2. Configure the 48B Master panel:
a. Go to
Encore Panels > 48B > Select
. Select the 48B panel that will be the
Master panel.
b. Go to Configure 48B Flags > Panel Group Name . This will display the
Panel Groups names list. Select the name of this 48B panel.
c. Configure the individual Master panel buttons as desired.
In this example the total of 144 buttons available can be assigned to
Sources, Destinations, Levels, Lock/Protect, etc. The 48B control panel
can be assigned a default Destination without having to assign a
button, so you could have 128 Sources to a single Destination, several
Levels, a Lock/Protect, and some Salvos all in the same control panel
group (
Figure 161 ).
d.
When finished configuring the Master panel buttons, select
Save
to
save the configuration changes.
3. Configure the first 48B Expansion panel:
a. Go to Encore Panels > 48B > Select . Select the 48B panel that will be the
first Expansion panel.
b.
Go to
Configure 48B Flags > Panel Group Name
. This will display the
“Panel Groups names list.” Select the name of the 48B panel that
will be the Master of the panel group.
c. Configure the individual buttons as desired. In this example, they
are all Source buttons, starting with Source 33 (
Figure 161 ).
d.
When finished, select
Save
to save the configuration changes.
4. Configure the second 48B Expansion panel as above, but start with
Source 80 as the first Source button.
S ources 80-128
Default Destination Only
48B Master
Expansion 1
Expansion 2
Levels 1-8
S ources 33-79
S alvos 1-7
Lock/Protect
S ources 1-32