GRASS VALLEY Encore, Руководство по настройке

Страница: 238 / 426

238 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Protect
When ON, allows the panel to Protect a Destination, pre-
venting devices except for the panel initiating the Protect
from changing the Source of the Protected Destination.
The panel that initiated a Protect can remove that Protect.
Note that a “super user” panel (
Force Lock/Protect
,
Lock/
Protect Override
) can override a Protect. This flag is mutu-
ally exclusive with
Hard Lock
and
Soft Lock
.
Quick Take
When ON, enables one button Take mode (only available
on CLNT panels). The CLNT panel’s
Protect
buttons will
also change their function. Pressing
Protect
in this mode
allows identification of the source on each keypad button
before performing a Take (by pressing the numbered but-
tons). Turn the
Protect
button off to perform a Take. All
Taken sources are automatically Protected in this mode.
Protects can be removed using the Encore OUI, or using a
panel with Protect override.
Self Config Lock
When ON, disables the panel's ability to dynamically self
configure (assign Sources, Destination, Levels or Salvos to
buttons) using the control panel itself. (See
Control Panel
Self Configuration
on page 281 .)
Self Protect
This feature is currently not available.
Server Panel
When ON, makes that panel a Server panel for operation
in a panel group with a Client panel.
Shift Latching
This feature determines the behavior of the Shift button
on the panel. When ON, after the Shift button is pressed
the panel operates in shifted mode until the button is
pressed again to toggle it off. When OFF, after the Shift
button is pressed the panel operates in the shifted mode
only until a keypad button is pressed, and then automat-
ically reverts to non-shifted operation and toggles the
Shift button off.
SMS7000
Compatibility
When ON, restricts some panel features for SMS7000
compatibility.
Soft Lock
When ON allows the panel to Soft Lock a Destination,
which prevents all devices from changing the Sources for
that Soft Locked Destination until the Soft Lock is
removed. Any panel with the Lock/Protect feature active
can remove a Soft lock from a Destination. Note that a
“super user” panel (
Force Lock/Protect
,
Lock/Protect Override
)
can also override a Soft Lock. This flag is mutually exclu-
sive with
Hard Lock
and
Protect
.