GRASS VALLEY Control System, Руководство по выпуску

Страница: 7 / 32

JUPITER — Release Notes 7
Version
7.9.0
NOVEMBER 2010
JUPITER Release Notes
Introduction
This document describes new product enhancements that are provided in
the 7.9.0 version of the Jupiter Control system. The installation procedure
that should be used to upgrade a Jupiter system to the 7.9.0 version is also
described in this document (See the
Upgrading to 7.9.0 section).
Note This release only supports the English version of the Windows XP Profes-
sional Operating system.
New Features in Jupiter Release 7.9.0 AccuSwitch
The 7.9.0 version of the Jupiter AccuSwitch Control system software has the
following enhancements and changes:
• Support for the CM-4400.
• Pro-Bel SW-P-08 Protocol.
• The Remote PC feature is no longer supported.
These features provide customers with improved control, convenience, and
flexibility when connecting and using Jupiter’s control panels.
Each of these features is described in detail below.
Support for the CM-4400
The 7.9.0 version of Jupiter supports the CM-4400, which is the new hard-
ware platform for the AccuSwitch software.
You must set the Subnet Mask and Gateway IP addresses to run the 7.9
version of Jupiter on the CM-4400; these settings are not required on the
CM-4000.