GRASS VALLEY ADVC-110, Преобразование инструкций

Страница: 1 / 3

Revised 2/12/2015
CONVERTING VHS TAPE TO DVD
1. Setup
2. Converting VHS tape to DVD
SETUP
Make sure to point the remote at the VCR, not the computer. Also,
remote commands show up on the Quicktime screen, not the VCR.
1. Open up Quicktime Player . No windows will pop up, but
you
’ll see the Quicktime title appear in the upper left corner
of the screen.
2. Go to File > New Movie Recording .
3. This opens a new window where you can see what
’s going on with the conversion. The
Quicktime window is acting as the TV.
4. Make sure the VCR/DVD unit is powered on.
5. Push DVD on the remote.
6. Make sure the Canopus (White box atop VCR/DVD unit) is set to analog (the blue light
switches between analog and digital by pushing the silver button). This will turn the
screen in Quicktime blue.
CONVERTING VHS TAPE TO DVD
Make sure to point the remote at the VCR, not the computer.
1. Insert your blank DVD first. You must insert the DVD first for this to work correctly. Wait
for it to load.
ANALOG/DIGITAL SWITCH
EJECT POWER
DUBBING
VCR MODE DVD MODE
REC MODE