manualshive.com logo in svg

GRASS VALLEY 8990ARC -, Инструкция по эксплуатации

Поделиться
Скачать
GRASS VALLEY 8990ARC - Скачать руководство пользователя страница 18

 

18

8990ARC Instruction Manual

Configuration

 

 

 

The output will change according to the last valid command from the 
highest priority enabled control. For example, consider a case where the 
Video Index is enabled and its input is invalid. The user sets the conversion 
mode with the control panel to Bypass which passes the Video Index signal 
through to the output. The Video Index input changes to valid and sets the 
conversion mode to Letterbox. The Video Index then becomes invalid 
again.

The output will remain at Letterbox until another valid enabled control 
changes the conversion mode. It will not revert back to the setting set with 
the control panel.

 

Tilt/Pan Control

 

Tilt and pan controls for left and right, centering, and top and bottom posi-
tioning are provided depending on the Conversion mode selected. 

 

Video and VBI Line Handling

 

The module handles lines in the video input differently depending on 
whether the line is an active video or a vertical interval line. 

Vertical interval lines (lines 1-20/264-283 in 525 or lines 624-23/311-336 in 
625) are either passed to the output unchanged or blanked by the VBI 
Bypass circuit. This selection is made with the VANC Data control.

Active video lines (lines 21-263/284-525 in 525 or lines 24-310/337-623 in 
625) are processed through a scaling circuit. Depending on the mode of the 
module and the line number, they are either passed to the output, replaced 
with a scaled version of part of the input active video, or replaced with 
black fill.

If, for example, the scaling circuit is magnifying the video vertically, all 
active lines are replaced with scaled lines and the portion of the scaled 
video that doesn’t fit in to the active space is discarded.

If the scaling circuit is reducing the video vertically, all of the scaled video 
is displayed on the output and active lines that are not covered by the 
scaled video are blanked.

When information such as closed captioning data is present on one of the 
first three active video lines, (lines 21/284, 22/285, and 23/286 in 525 or 
lines 24/337, 25/338, and 26/339 in 625), these lines can be designated as 
data lines and will be treated as part of the vertical interval passing the data 
to the output when the VANC Data control is set to 

 

Pass

 

. 

Содержание 8990ARC -

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды