Specifications
Ordering Information
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
8900V-R
SDI
Input 1
SDI
Input 2
SDI
Input 3
SDI
Input 3
Reference
Input
NTSC/PAL
Output 1
NTSC/PAL
Output 2
NTSC/PAL
Output 2
NTSC/PAL
Output 2
Loopthru
NTSC/PAL 1
NTSC/PAL 2
NTSC/PAL 3
NTSC/PAL 4
Timing
Timing
Timing
Timing
Reference
Looping
Reference Input
SDI 1
SDI 2
SDI 3
SDI In
SDI In
SDI In
SDI In
SDI 4
Video
Proc
Video
Proc
Video
Proc
Video
Proc
Composite
Out
Composite
Out
Composite
Out
Composite
Out
VBI
VBI
VBI
VBI
75
This module can be mounted in a GeckoFlex
frame when ordered with the 8900V-R GeckoFlex
Video rear.
8964ENC
Four-channel SDI to NTSC/PAL encoder with line
synchronizer
8964ENC-FS
Four-channel encoder with frame synchronizer
The 8964ENC is a high-density, four-channel
module that converts four 270 Mb/s serial
component digital signals to four NTSC or
to four PAL composite analog outputs on a
single module. Typical applications include
cost-effective analog VTR interfaces, composite
analog production switcher inputs, and
analog transmitter feeds. Up to 40 encoders
can be housed in only 2 RU of space. Most
adjustments to this card can be performed
on the module’s card-edge controls. The
on-screen display capability included with
each module greatly simplifies card-edge
configuration.
Key Features
10-bit signal processing
•
Four 270 Mb/s SDI to NTSC/PAL encoders
•
On Screen Display (OSD)
•
Configuration information keyed onto
•
video output simplifies local card-edge
controls
Outputs four independent NTSC or PAL
•
video signals:
—
Supports NTSC with or without setup
—
Proc. amp controls
—
Line-by-line VBI processing
—
Confidence test signal generator
Options:
•
—
Frame synchronizer, offers full frame
output phasing
Supported Frame Types
GeckoFlex with 8900V-R GeckoFlex Video rear module,
Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V
Power Rating
8.5 Watts – single slot
Inputs
Number of inputs:
Four, one for each encoder
Signal type:
SMPTE 259M, 10-bit, 270 Mb/s serial
component digital
Connector:
Terminating 75Ω BNC
Return loss:
>15 dB to 270 MHz
Reference Input
Number of inputs:
One NTSC/PAL (required for
operation)
Signal type:
Color black, SMPTE 170M (525 lines)
or CCIR
Connector:
Looping 75Ω BNC
Return loss:
>36 dB to 5 MHz
Outputs
Number of outputs:
Four, one for each encoder
Signal type:
SMPTE 170M for NTSC and
CCIR624 for PAL
Connector:
75Ω BNC
Return loss:
>40 dB to 5.5 MHz
Isolation:
≥60 dB to 5.5 MHz
Performance
Quantization:
10-bit
Response:
±0.1 dB to 5.5 MHz
Differential phase:
<0.5°
Differential gain:
<0.9%
RMS SNR:
>60 dB to 5.5 MHz
Output phasing:
Full frame with frame synchronizer
Electrical length:
2.1 µs
Hue:
±22.5
Operating temperature:
0° to 45°C
Relative humidity:
0% to 90%
Indicators and Controls
Indicators:
Input video present, reference present,
communication active, power, fault
Controls:
Output gain, luma level, black level, chroma
level, hue, filters, vertical blanking, test signal, timing
Remote:
All indicators and controls via Ethernet
8964ENC
Four-Channel SDI to NTSC/PAL Encoder
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular