GRASS VALLEY 8943FC, Инструкция по эксплуатации

Страница: 9 / 64

8943FC — Instruction Manual 9
8943FC 4 Channel Fiber to
Electrical Converter Module
Introduction
This manual covers installation, configuration, and operation of the 8943FC
4 Channel Fiber to Electrical Converter module.
Module Features
The 8943FC module is a four channel optical to electrical converter
(receiver) with four optical input channels each with two electrical BNC
outputs. The module can accommodate a variety of high definition video
inputs up to 3 Gb/s as well as DVB/ASI, AES, and MADI interfaces..
The following features are available with this module:
• Two module set including a hot-swappable front and rear module and
up to two optional single mode dual receiver fiber optic SFP devices
mounted on the front module. Model options are given in
Table 1 on
page 10 .
• Up to ten 8943FC modules in the same 2 RU GeckoFlex frame.
• Two electrical BNC outputs for each of the four fiber optic input chan-
nels.
• Two re-clocked outputs for each fiber input for stable long distance
reception of each optical feed.
• Re-clock bypass for non-SDI signal types.
• Supports both HD or SD formats and passes embedded audio present
in the incoming video stream.
• SNMP and product health monitoring is supported through the
8900NET module with applications such as NetCentral.
• Software updating using the NetConfig Networking application.