Grason-Stadler GSI NOVUS Скачать руководство пользователя страница 25

Страница: 25 / 96

GSI Novus™ Newborn Hearing Screening System User Manual

D-0113050 Rev H

Page 25 of 96

SING THE OPTIONAL LABEL PRINTER

POWERING THE LABEL PRINTER

The label printer is powered by a Lithium-ion battery. In
order to charge the battery, you must insert the plug of
the charger into the DC socket on the printer and plug the
power supply into an outlet.

INSERT LABEL ROLLS INTO THE LABEL PRINTER

The printer indicates that it has run out of paper by displaying the message "Out of
paper" on the screen and the blue LED (ERROR) flashes.

To insert a new label roll into the label printer,
open the printer by pressing the small latch button

Insert the label roll into the printer with the paper
end placed towards the open cover. Hold the paper
end in place and close the cover.

Turn the printer on and press the feed button on the left side so that the printer can
properly align the labels with the print head.

CONNECTING THE LABEL PRINTER TO NOVUS

The connection of the Novus and the label printer is made via Bluetooth pairing (See the
Setup, Printer section of this manual).

Содержание GSI NOVUS

































































































Результаты поиска

Содержание GSI NOVUS

Отзывы:

Grason-Stadler GSI NOVUS, Руководство пользователя, Страница: 25 / 96

Результаты поиска

Содержание GSI NOVUS

Отзывы: