manualshive.com logo in svg

GRAPHTEC OPS676, Руководство пользователя, Страница: 12 / 35

Поделиться
Скачать
GRAPHTEC OPS676 Скачать руководство пользователя страница 12

12

2. Setting Tool Conditions [CONDITION]

1

Media Name

Displays the name of the tool condition that is currently selected. To

save a tool condition as a new one, enter a new file name here.

In order to correctly display the media name on the Plotter LCD 

screen, do not use more than 11 characters for 2-byte characters 

and no more than 22 characters for ASCII. Please be aware that 

other characters do not show up properly on the Plotter LCD screen. 

(Special characters are displayed with spaces.)

 Media Name (page 16)

2

Tool

Specify the part no. of the cutter blade, or the pen.

3

Force

Set the force of the cutter or the pen.

Setting range

CE6000-40: 1 to 31/40Plus: 1 to 38

CE6000-60/60Plus: 1 to 38

CE6000-120/120Plus: 1 to 38

4

Speed

Set the move speed of the tool.
Setting range

(cm/s)

CE6000-40/40Plus: 1 to 60

CE6000-60/60Plus: 1 to 64

CE6000-120/120Plus: 1 to 71

5

Accel

Set the acceleration of the tool.

Setting range

CE6000-40/40Plus: 1 to 3

CE6000-60/60Plus: 1 to 3

CE6000-120/120Plus: 1 to 2

6

Offset

Fine-adjust the difference between the tip of the blade and the 

center of the plunger. Set this value based on the type of the cutter 

blade that you use.

 What is Offset (page 12)

 Guideline of Offset Setting (for Each Cutter Blade) (page 12)

7

About the blades

Displays detailed information on the cutter blade and the plunger of 

the tool that is currently selected.

8

Advanced

Displays advanced setting items.

 Advanced Control of Tool Behavior (page 13)

9

OK

Saves the set content as the current media name and closes the 

tool condition setting screen. To newly save it, enter the optional file 

name into media name.

10

Cancel

Cancels the settings and closes the tool condition setting screen.

Guideline for Settings (for Each Media)

Refer to the Cutter Blade Manual.

Guideline for Settings (When Plotter Pen is Selected)

Pen type

Part no.

Force 

(Cutting force)

Speed

(cm/s)

Acceleration

Water-based fiber-tip pen

KF700 Series

10 to 12

30

2

To prolong the pen life, set the FORCE to the lowest setting, and set the SPEED after checking to 

confirm that there are no faint lines or other problems during plotting.

Guideline of Offset Setting (for Each Cutter Blade)

Refer to the Cutter Blade Manual.

What is Offset

It will adjust the difference between the tip of the blade in the 

plunger and the center of the plunger. There are standard 

adjustment values for each cutter blades. Fine adjustment will 

be made to that standard values here. (Adjustment will be made 

with standard value as 0.)

Содержание OPS676




































Отзывы:

Нет отзывов