GRAPHTEC JW220-06 Скачать руководство пользователя страница 3

Страница: 3 / 119

Safety Precautions

To ensure the safe and correct use of your printer, be sure to observe the following

points.

Installation Precautions

WARNING

Do not install the printer in the vicinity of

volatile solvents such as alcohol or thinner.

• A volatile solvent coming into contact with any of the

internal electrical components may result in a fire

hazard or electric shock.

Do not place objects such as those listed

below on top of the printer.

• Objects such as these coming into contact with any

of the internal electrical components may result in a

fire hazard or electric shock.

- Metallic objects such as necklaces

- Objects such as glasses, vases, houseplants, etc. that contain water or other fluids

If any of these objects does come into contact with the internal electrical components

immediately turn off the power, remove the plug from the power outlet, and either

contact the store where you purchased your printer or your nearest Graphtec represen-

tative.

CAUTION

Do not use the printer in an unstable location

such as on a slope or a location that is subject

to a lot of vibration.

• Such locations may cause the printer to tip over and

cause injuries.

Do not place heavy objects on top of the

printer.

• Such objects may tip over or fall off, causing injuries.

Benzine

Thinner

Содержание JW220-06
























































































































Результаты поиска

Содержание JW220-06

Отзывы:

Бренды по названию

Популярные бренды

GRAPHTEC JW220-06, Руководство пользователя

Результаты поиска

Содержание JW220-06

Отзывы:

Бренды по названию

Популярные бренды