GRAPHTEC CS1000EV, Руководство пользователя

Страница: 74 / 75

CS1000EV/1100EV Index – 1
INDEX
A
Assembling the scanner (CS1000EV) ...... 2-1
C
Calibration ................................................... 5-7
Carrier sheet, using the ............................. 4-5
Caster .......................................................... 2-3
Control panel .............................................. 2-4
Cover sensor .............................................. 2-3
D
Daily maintenance ...................................... 5-1
Daisy-chain ................................................. 3-3
Deviation due to scanner
specifications ........................................... 6-4
DIP switch ................................................... 2-5
Document grade and thickness ................ 4-1
Document hold-down unit .......................... 4-7
Document hold-down unit, mounting the ... 4-9
Document hold-down unit, cleaning the .... 5-4
Document hold-down unit, EV ............ 2-8, 4-6
Document length ........................................ 4-1
Document loading operation ..................... 4-3
Document-scanning table .......................... 4-3
Document support wire .............................. 2-6
Document types .......................................... 4-1
Document width .......................................... 4-1
E
ERROR LED ....................................... 2-4, 6-2
EV Document hold-down unit ........... 2-8, 4-6
F
FORWARD key ........................................... 2-4
H
Host computer, connecting to the ............ 3-7
I
ID-number setting ....................................... 3-5
Image sensors, cleaning the ..................... 5-1
Interface ...................................................... 1-1
INDEX
M
Missing data ............................................... 6-4
O
Overlapped data ......................................... 6-4
P
Paper jam ................................................... 5-5
PAPER LED ................................................ 2-4
Paper sensor .............................................. 2-3
Paper sensor, cleaning the ....................... 5-3
Part Names and Functions ....................... 2-3
Power cable, connecting the ..................... 3-2
POWER LED .............................................. 2-4
Power switch .............................................. 2-5
R
REVERSE key ............................................ 2-4
S
Scanner, assembling the ........................... 2-1
Scanning Master 21+, installing the ....... 3-18
SCSI cable, connecting the ....................... 3-3
SCSI connector .......................................... 2-5
SCSI-ID switch ........................................... 2-5
Stand ........................................................... 2-3
Stock brackets (EV unit) ........................... 2-8
STOP key ................................................... 2-4
System requirements ................................. 3-1
T
Top cover .................................................... 4-7
Transparent contact plates ........................ 5-1
Troubleshooting .......................................... 6-1
U
Usage precautions ...................................... viii
W
Warmup ........................................................ viii