GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 55 / 227

2-26
Feedng method for the loaded meda s set.
Operation
CAUTION
Before dong the meda set selecton, make sure
to release the meda lock.
Supplement
The CONTINUE menu parameter appears
when the meda set lever s rased and then
lowered agan after meda was prevously
loaded, makng t possble to select the
prevous settngs.
Pressing the [4] key to Continue (Do
the same thing as last time)
When usng the same meda wthout changng
the poston of the meda, the CONTINUE
functon enables the contnued use of the
plottng area, pen poston and orgn poston
that were specified before the media set lever
was lowered. If the current meda s the same
size as the last media that was loaded, the
plotter does not detect the meda's edges.
1
If you have already loaded the meda, the MEDIA TYPE
menu appears. Select the meda type to sut the loaded
meda.
Check that the meda stopper s unlocked and then select a
meda type on the meda set settng screen.
Lever
Lowerng the lever releases the stopper lock.
Supplement
When selecting [1] or [2] key
Please confirm on the confirmation screen that
the lever lock has been released, then press
the [ENTER] key. Ths wll be dsplayed on the
above screen.
When selecting [3] key
The above screen wll dsplay when set-up
for meda more than 5 meters long. Please
confirm and then press the [ENTER] key To
cancel, please lower the meda set level and
change the meda.
When Selecting [ROLL-1
FRONT EDGE] Pressing the [1] Key
Select ths when you have loaded a roll of meda and you
wsh to start cuttng or plottng from the leadng edge.
The wdth and leadng edge of the roll meda are detected.
When Selecting [ROLL-2
CURRENT POSITION] Pressing the [2] Key
Select ths when you have loaded a roll of meda and you
wsh to start cuttng or plottng from a pont beyond the
leadng edge.
Only the wdth of the roll meda s detected.
When pressing the [3] key to select SHEET
Select ths when a cut sheet has been loaded. The wdth,
leadng edge, and tralng edge of the sheet are detected.
2.8
Setting Feeding Method