GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 47 / 227

2-18
Changing the Hold-down Force
The down force appled by the mddle 3 push rollers can be changed dependng on the wdth and type of meda
used.
When usng the genune Graphtec paper, please set the force of the mddle push roller to "Normal" and the
remanng 2 rollers to "Low" (OFF).
Meda sensor
Grt roller
Push roller
Left-hand push roller
Rght-hand push roller
Normal
Low (OFF)
Low (OFF)
Switching
(1) Lower the meda set lever to rase the push rollers.
(2) Use the push roller hold-down force swtchng lever on the back of the push roller to adjust the center push
roller's hold-down force. It can be set to Normal or Low (OFF).
(3) When the push roller hold-down force swtchng lever s up, t s n Normal mode. When t s down, t's Low
(OFF).
Hold-down force: Normal Hold-down force: Low (OFF)
Lever Lever
CAUTION
Hold-down force can not be swtched for sde push rollers.
Supplement
Swtch the hold-down force as necessary for dfferent types of meda.