GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 212 / 227

A-2
CE6000-120AP
CPU 32bt CPU
Configuration Grt-rollng plotter
Drve Dgtal servo
Max. Cut Area 1190 mm × 50 m
Guaranteed precson cuttng area*
1
1190 mm × 3 m
Mountable meda wdth*
2
Mn: 594 mm
Max: 1220 mm
Dameter of mountable rolls 3-nch paper core
Avalable roll meda damete Max. dameter: 200 mm
Mountable roll paper (meda) 20 kg or less
The number of push roller 5
Max. cuttng speed 600 mm/s (Omndrectona)
Specifiable speeds (cm/s) 1 to 10, 15, 20, 25, 30, 35, 40,45, 50, 55, 60
(Max. 30 cm/s durng PANEL CUTTING)
Cuttng Pressure 0.2 to 4.41 N (20 to 450 gf) 38 steps
Min. character size 5 mm alphanumerc Helvetca med. Font
Mechancal resoluton 0.005 mm
Program mable resoluton GP-GL : 0.1/0.05/0.025/0.01 mm
HP-GL*
4
: 0.025 mm
Repeatable accuracy*
1
*
3
Max. 0.1 mm unt of 2 m (Desgnated Flm and Cut Condtons)
Number of cutters/pens 2
Usable pen type Water-based fiber-tip and oil-based ballpoint
Interface RS-232C/USB2.0 (Full Speed)
Buffer memory 2 MB
Resdent command sets GP-GL/HP-GL*
4
(Control panel swtchng)
LCD dsplay Graphc type (240 × 128 dot)
Power supply AC100-120 V, 200-240 V, 50/60 Hz
Power consumpton 120 VA or less
Operatng envronment 10 to 30℃, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy envronment 18 to 28℃, 40 to 65 % R.H. (non-condensing)
External dmensons (W × D × H) 1575×1200×250 mm (Includng stand)
Weght 46 kg (Includng stand)
*1: Dependent on the media condition settings specified by this com our company.
*2: Descrbes the usable paper wdth. Accuracy assurance for the mnmum paper wdth s the wdth when the push roller s set to 5 mm
nsde of both sdes of the meda.
*3: Please be aware that the accuracy of this machine is measured against Graphtec Mylar film.
Ths machne takes only qualty coated (glossy) paper
*4: HP-GL s a regstered trademark of the US Hewlett Packard Company.
A.1
Main Specifications