GRAPHTEC CE6000-120AP, Руководство пользователя

Страница: 105 / 227

4-11
The function to cut specified numbers of cutting data stored in the buffer memory is called COPY.
Supplement
Do not send new data to plotter whle copyng. Cuttng data n the buffer memory wll be cleared.
Prevous cuttng data wll be cleared and newly sent data wll be stored as cuttng data f you send new data wth 10 seconds or
more interval from the time it finished cutting.
It can not copy f data s more than 1.6 MB because t cannot be stored n the buffer memory of the plotter.
Buffer memory that can be used for copy wll decrease f you turn on the data sort. Turn off the data sort when you need to copy
cuttng wth large data. See "Sortng the Cuttng Data"
P.7-2
for data sort.
Watch out that t does not fall out of meda when cuttng wth copy functon.
If the orgnal cuttng data to be coped starts away from the orgn pont, coped cuttng wll also start away from the orgn pont. To
avod wasted space, create the cuttng data close to the orgn pont.
Algnment regstraton mark data cannot be coped.
When Media Change mode is off
Copy is performed in following order.
Orgn pont
Frst cut
Copy orgn
pont
Frst copy
Thrd
copy
Second copy
Fourth copy
Copy
space
Copy
space
It will copy in following order when COORDINATE AXES ROTATION is set.
Orgn pont
Frst cut
Copy orgn pont
Fourth copy Ffth copy
Frst copy
Second copy
Copy
space
Copy
space
Thrd copy
4.2
Copy (Duplicate Cutting)