10
Quick Start
Programming a Crease Job
Turn on machine. Screen 1 will appear after the welcome page.
Screen 1
Screen2
Press
M
button once, the screen will change to Screen 2 and line [1] will flash.
Enter line [1] value, 3 (3.0). Press
Enter
, line [2] will flash.
Enter line [2] value, 6 (6.0). Press
Enter
, screen change to Screen 3, line [3] will
flash.
Screen 3
Screen 4
Enter line [3] value 9 (9.0). Press
Enter
, line [4] will flash.
Press
Enter
when line [4] is 0, screen will change to Screen 4
Press
RUN
to feed a sheet. Paper is creased at
3”, 6”, 9” (crease line distance
from the leading edge).
Press
STOP
if you want to stop the job.
