Grape Solar
GS-PWM-10A-IP68
Waterproof Charge Controller
Quick Start Manual
■
IP68 level waterproof
PWM 3-stage charge
For 12V batteries only
LED status indicator
Connectors included
Extra cable length
*Diagram not to scale.
Страница 1: ...ar GS PWM 10A IP68 Waterproof Charge Controller Quick Start Manual IP68 level waterproof PWM 3 stage charge For 12V batteries only LED status indicator Connectors included Extra cable length Diagram not to scale ...
Страница 2: ...ould light up solid STEP 2 Connect the MC4 style solar connectors to a 12V solar panel rated no more than 150 watts As the battery charges the solar LED indicator should begin to slowly flash When you need to disconnect the system reverse these previous steps by disconnecting the solar panel first then disconnecting the battery Solar connectors Battery connectors Solar LED indicator Battery LED in...
Страница 3: ... alert No charge from battery Battery connected Over discharge alert This indicator is generally off during night time Check to ensure your solar array is 30 volts or less Battery is almost drained Make sure your battery is fully charged at least once a month to prevent damage and improve product life Product Dimension 65 mm 2 6 in 82 mm 3 2 in 75 mm 3 0 in 43 mm 1 7 in 28 5 mm 1 1 in 17 5 mm 0 7 ...
Страница 4: ...loat Charge Voltage Over discharge Voltage Over discharge Recovery No load Loss Operating Temperature 30V 10A 150W AGM Gel Flooded 12V ONLY 14 6V 1 Hour 14 4V 2 Hours 13 2V 13 8V 11 1V 12 6V 8mA 31ºF to 140ºF Parameter Values CAUTION Do not use controller in enclosed spaces with limited air flow as the controller can heat up quickly Do not use on non specified battery types such as lithium ion and...
