Grandstream Networks WP810, Руководство администратора

Страница: 49 / 62

P a g e | 49
WP810 Administration Guide
Version 1.0.7.83
Network /Wi-Fi Settings
Country Selects the country code for the WiFi settings.
SSID 1-10
SSID Wi-Fi name
Enabled
Enable/Disable SSID
Hidden Specifies if it is a Hidden SSID
Security
Security Type
This parameter defines the security mode used for the wireless network
when the SSID is hidden. 3 Modes are available:
- WEP
- WPA/WPA2 PSK
- WPA/WPA2 Enterprise: This feature allows using 802.1x WPA2-
Enterprise secure network authentication.
Password Password to access Wi-Fi Network
802.11r
This feature allows user to use 802.11r. The default setting is Disabled.
Network
Internet Protocol
Selects which Internet protocol to use. When both IPv4 and IPv6 are
enabled, phone attempts to use preferred protocol first and switches to the
other choice if it fails.
IPv4 Address
Select the address mode for the IPv4 Address obtained on the phone.
Default is “DHCP”. If set to “Static”, additional information will be required:

IPv4 Static Address

Subnet Mask

Gateway

DNS server 1 & 2
Preferred DNS Server Enter the Preferred DNS server.
IPv6 Address
Select the address mode for the IPv6 Address obtained on the phone.
Default is “Auto-configured”. If set to “Statically configured”, additional
information will be required:
- Full Static : Configures IPv6 address using Full Static type.

Static IPv6 Address

IPv6 Prefix length
- Prefix Static : Configures IPv6 address using Prefix Static type.

IPv6 Prefix (64 bits)

DNS server 1 & 2
Preferred DNS Server Enter the Preferred DNS server.