Grandstream Networks UCM6510, Руководство пользователя

Страница: 71 / 483

P a g e | 70
UCM6510 IP PBX User Manual
Version 1.0.20.31
IPv4 address - 192.168.66.4
IPv6 subnet - 2001:740:D::1/64
Netmask
Configure the subnet mask for the above destination address. If left blank, the
default value is 255.255.255.255.
Example: 255.255.255.0
Gateway
Configure the IPv4 or IPv6 gateway address so that the UCM6510 can reach the
destination via this gateway. Gateway address is optional.
Example:
192.168.40.5 or 2001:740:D::1
Interface
Specify the network interface “LAN”, “WAN” or
“
Data trunk 1” (“Data Trunk 1”
option will show only when the data trunk is enabled) on the UCM6510 to reach the
destination using the static route.
The following diagram shows a sample application of static route usage on UCM6510.
Figure 17: UCM6510 Static Route Sample
The network topology of the above diagram is as below:

Network 192.168.69.0 has IP phones registered to UCM6510 LAN 1 address

Network 192.168.40.0 has IP phones registered to UCM6510 LAN 2 address

Network 192.168.66.0 has IP phones registered to UCM6510 via VPN

Network 192.168.40.0 has VPN connection established with network 192.168.66.0