Grandstream Networks UCM6510, Руководство пользователя

Страница: 54 / 483

P a g e | 53
UCM6510 IP PBX User Manual
Version 1.0.20.31
The following table shows the LCD menu options.
Table 3: LCD Menu Options
View Events

Critical Events

Other Events
Device Info

Hardware : Hardware version number

Software : Software version number

P/N : Part number

WAN MAC : WAN side MAC address

LAN MAC : LAN side MAC address

Uptime : System uptime since the last reboot
Network Info

WAN Mode : DHCP, Static IP, or PPPoE

WAN IP : IP address

WAN Subnet Mask

LAN IP : IP address

LAN Subnet Mask
Network Menu

WAN Mode : Select WAN mode as DHCP, Static IP or PPPoE

Static Routes Reset : Select this to reset static route settings.
Factory Menu

Reboot

Factory Reset

LCD Test Patterns
Press DOWN and OK buttons to scroll through and select different LCD
patterns to test. Once a test is done, press the OK button to return to the
previous menu.

Fan Mode
Select Auto or On.

LED Test Patterns
All On, All Off, and Blinking are the available options. Selecting Back in the
menu will revert the LED indicators back to their actual status.

RTC Test Patterns
Select either 2022-02-22 22:22 or 2011-01-11 11:11 to start the RTC (Real-
Time Clock) test pattern. Check the system time from either the LCD idle
screen or in the web portal System Status->System Information->General
page. To revert back to the correct time, manually reboot the device.