Grandstream Networks UCM6200 Series, Руководство пользователя

Страница: 89 / 469

P a g e | 88
UCM6200 Series User Manual
Version 1.0.20.38
Assuming the remote server base dn is “ dc=pbx,dc=com ”, configure the LDAP client as follows:
•
LDAP Server: Enter a name for the remote LDAP server
•
Server Address: Enter the IP address or domain name for remote LDAP server.
•
Base DN: dc=pbx,dc=com
•
Username: Enter username if authentication is required. This field cannot exceed 64 characters and
can contain space.
•
Password: Enter password if authentication is required.
•
Filter: Enter the filter. Ex: (|(CallerIDName=%)(AccountNumber=%))
•
Port: Enter the port number. Ex:389
•
LDAP Name Attributes: Enter the name attributes for remote server
•
LDAP Number Attributes: Enter the number attributes for remote server
•
Client type: Protocol of LDAP or LDAPS.
•
LDAP Client CA cert: Upload LDAP client CA certificate, The following file types are supported: .crt .der
and .pem.
•
LDAP Client Private Key: Upload LDAP client private key.
The following figure gives a sample configuration for UCM acting as a LDAP client.
Figure 43: LDAP Client Configurations
To configure Grandstream IP phones as the LDAP clients for UCM, please refer to the following example:
•
Server Address: The IP address or domain name of the UCM6200
•
Base DN: dc=pbx,dc=com
•
Username: Please leave this field empty
•
Password: Please leave this field empty
•
LDAP Name Attribute: CallerIDName Email Department FirstName LastName
•
LDAP Number Attribute: AccountNumber MobileNumber HomeNumber Fax
•
LDAP Number Filter: (AccountNumber=%)